|
Item Picture
|
Item Description &
Reference Number
|
|
|
|
||
  |
John Buncle & Son ¼ x 5/16 (WW) cast iron spanner,
heavily incised “JOHN BUNCLE & SON / MELBOURNE”, a hard
to find spanner, heavy writing will display well. Ref: Buncle-4 Price: $25 plus postage |
|
 |
Hand Cultivator wrench marked “IronAge” in cutout letters and “C9” on the jaws. Ref: IronAge-C9-3 Price; $25 plus postage |
|
 |
Rare Australian Co "Cliff & Bunting" SOE Spanner Wrench Ref: C&B-2 Price: $50 reduced to $25 plus postage |
|
| Ferguson | ||
 |
Original Grey Ferguson toolbox, side mounted, poor condition. Ref: FergyToolbox Price: $25 plus postage  |
|
 |
(MHF-)SOE spanner marked: “185931M1" Jaw measures
3/4"WW or 1-5/16"AF. 12" long, 950g. This could be an aftermarket
spanner by Agco who make replacement parts and machinery Ref: MHF-185931M1 price: $45 plus postage |
|
 |
(MHF-)DOE spanner marked: “7/8AF Ref: 827439M1 3/4AF” Ref: MHF-827439M1 Price: $50 plus postage |
|
  |
DOE Spanner for Massey Ferguson Tractor, same sizes as the EN18 series, but marked “11/16 MHF-180108M1 1-1/16” Ref: MHF-180108M1 Price:$60 reduced to $40 plus postage |
|
 |
Ferguson Ring spanner marked “11/16 Ferguson 1-1/16
” showing signs of use, slightly battered but still fully
functional. Ref: FergyRing-Poor Price: $150 reduced to $100 plus postage |
|
 |
Ferguson Disc Plough Spanner, 25 inches long. Jaw size
is 1 inch Whitworth which equates to approx 1-5/8inches
AF or 43mm. Ref: Ferg-S4-B5 Price: AUD $250 plus postage |
|
 |
Ferguson ring / flare nut spanner. This is for
TEF20 tractors with the Standard Motors Diesel
engine. The flared end fits onto fuel injectors,
while the ring end fits the nuts on the fuel
filters. Click picture to see an enlarged version.
More info on this
webpage Ref: Ferg-S9 Price: $150 reduced to $120 plus postage |
|
 |
Ferguson DOE Spanner with inch measurements. This
is an example made by Matador, a hard to find
version of the Fergy SOE spanner. More info on this
webpage do look at the larger pictures by
clicking on any picture. Ref: Ferg-S5 Price; $150 reduced to $100 +p&p |
|
| Picture coming soon |
Ferguson DOE Spanner with inch and Centimetre
measurements. This is pre the EN18, hard to find
version of the Fergy SOE spanner. More info on this
webpage Ref: Ferg-S1b, price: $60 +p&p |
|
 |
Ferguson DOE Spanner with inch and Centimetre
measurements. EN18 version of the Fergy SOE spanner. More
info on this
webpage
Ref: Ferg-S8-C Price: $50 reduced to $ 30 +P&P |
|
 |
This is the “Baby Fergy” so named because it looks like a smaller version of the Ferguson EN18 type measurements spanner. I have no proof that it was supplied by Ferguson. There are so called experts online who swear it is a Ferguson spanner wrench. Do your own research and take the risk – it is not priced very high. Ref: BabyFergy, Price AUD $25 reduced to $20 +P&P |
|
 |
Ferguson DOE Spanner with inch and Centimetre
measurements. EN18 version of the Fergy SOE spanner. More
info on this
webpage
Ref: Ferg-EN18 Price: $50 reduced to $ 25 +P&P |
|
 |
Massey-Ferguson Tractors by Michael Williams Hard Back with dust cover, in new condition Ref; Ferg-M1-B, price; $35 reduced to $25 +P&P |
|
 |
Albion Spanner number 2365 Ref: Albion-2365 Price: $25 plus postage Albion Spanner number 2366 Ref: Albion-2366 Price: $25 plus postage |
|
 |
Albion Spanner number 2366, variation on the one above. Ref: Albion-2366 Price: $25 plus postage |
|
 |
Cast spanner marked ECLIPSE / M90. This is one of two shapes of the M90 spanner. Eclipse made milking machines and pumps. Ref: EclipseM90 Price: $25 plus postage |
|
 |
Superior Drill Co Small spanner numbered A-360. Ref: Superior-A360 Price: $25 plus postage |
|
 |
Siedersleben
1.95 just over 9” long. We interpret the 1.95 as January 1895.
“The company Wilhelm Siedersleben & Co., Bernburg, was one of
the major manufacturers of agricultural machinery in Germany between
1860 and 1940 and has made a name for itself above all through its
innovations in seed drills". Ref: Siedersleben Price AUD $150 reduced to $75 +P&P |
|
 |
Farm spanner marked “C H NICOLL & Co DUNDEE” 8 inches long Ref: C H Nicoll Price: $25 plus postage |
|
 |
Lee & Porter No 9 Axle wrench, hard to find Ref: Lee & Porter No 9 price: $50 reduced to $25 +postage |
|
 |
Porter patent Axle wrench No 22, hard to find Ref: Porter Patent No22 Price:$50 reduced to $25 +postage |
|
  |
StLouis
Wrench Co-B wrench – farm Implement / buggy wrench, marked
Patented Jan 29 91. According to Rathbone, this company was only
in business from 1893 – 1898. Ref: StLouis Wrench Co-B Price: $75 reduced to $25 +postage Vintage Dayton Wrench 2813-B Patented Implement Buggy Wrench. Very good condition. Ref: Dayton Wrench 2813-B Price: $35 reduced to $25 +postage Showing both sides |
|
 |
Malleable spanner Marked BENICIA HANCOCK PLOW D137. Pitted, but an uncommon BENICIA spanner wrench Ref: BeniciaD137 Price: $35 reduced to $25 +postage |
|
 |
Marked "Benicia Hancock Plow D138A". A hard
to find American farm wrench. Ref: BeniciaHancock Price: $75 reduced to $45 +postage |
|
 |
Three Agricultural DOE’s by Swedish firm Arvika-Verken. $ $25 reduced to $10 each. Ref; Arvike - Verken, Price: $25 reduced to $10 +postage
|
|
|
|
Howard brothers James & Frederick made all manner of implements, machinery, steamers, etc Ref: HowardBedford Price: $25 reduced to $20 +postage |
|
| Planet Jr | ||
 |
Pickering Steam Governor spanner wrench ref: Pickering wrench Price: Price: $25 +P&P |
|
|
|
Deane of Holyoke spanner – Deane made steam pumps Ref: DeaneHolyoke Price: $25 reduced to $15 +postage |
|
 |
Bental spanner with 3 openings. Bentall made various barn machinery Ref: Bentall Price: $20 +P&P |
|
 |
Bental 646 spanner for their barn machinery, only marked “646”. Some examples have the name BENTALL before the number. Ref: Bentall-646 Price: $20 +P&P |
|
 |
HolmanVintage Compressor spanner, cast iron, well marked, no flaws. Ref: Holman-1 Price: $35 reduced to $25 +postage |
|
 |
Rega cast iron spanner / key for knapsack sprayer. Ref: Rega-1 Price: $20 +P&P
|
|
| Caterpillar | ||
 |
Caterpillar Lshaped double socket wrench, marked “2H2873” in near new condition. Ref: Cat-2H2873 Price: $30 +P&P |
|
|
|
Caterpillar DOE spanner wrench, marked “5B783” / Williams sizes 3/4” x 11/16”, in near new condition. Ref: Cat-5B783 Price: $30 reduced to $20 +postage |
|
|
|
Caterpillar DOE spanner wrench by Williams No 5B784X, sizes are 7/8 x 13/16, good condition. Ref: Cat-5B784X Price: $30 reduced to $20 +postage |
|
|
|
Caterpillar DOE spanner wrench, marked “5B785” / Williams sizes 1” x 15/16”, in near new condition. Ref: Cat-5B785 Price: $30 reduced to $20 +postage |
|
|
|
Caterpillar DOE spanner wrench, marked “5B786” / Williams, sizes 1-1/8” x 1-1/16”, in near new condition. Ref: Cat-5B786 Price: $30 reduced to $20 +postage |
|
 |
Caterpillar Oil Drain Plug Extension Wrench no
6H5801M-c2. Also marked MG58. Ref: Caterpillar-6H5801M Price: AUD $25 +P&P |
|
 |
Caterpillar Oil Drain Plug Extension Wrench no
6H5801M-c2. Also marked MG58. variation on the one above. Ref: Caterpillar-6H5801M-2 Price: AUD $25 +P&P |
|
 |
Caterpillar Drain Plug Wrench no 6F3703M / MC 57 Ref: Caterpillar-6F3703M Price: AUD $25 +P&P |
|
 |
Caterpillar Water Pump wrench 9B-1496, new condition, made by Armstrong USA Ref: Caterpillar-9B-1496 Price: $30 reduced to $20 +postage |
|
 |
Caterpillar open ended spanner wrench part no 9F3869M. Large, heavy spanner, over 4kg without packing. Ref- Caterpillar-9F3869M, price $55 reduced to $25 +postage |
|
 |
Tyton Wooden Pulleys were used to provide and draw power from lineshafting in all sorts of workshops, shearing sheds, factories, assembly lines etc. There would be a central steam or diesel engine powering the shaft, and individual machines drew power via a leather belt on wooden or cast iron pulleys. This little spanner / key was used to assemble and keep the wooden pulleys in working order – a historic piece. Ref: Tyton Price: $50 reduced to $20 +postage |
|
 |
Arvika-Verken # 15980. Swedish Agricultural Company Ref: Arvika-15980 Price: $25 reduced to $15 +postage |
|
 |
Thomas Bradford & Co of Crescent Iron Works, Salford, Manchester and 140, 142 and 143 High Holborn, London. Since 1950. Manufacturers of Laundry, dairy, domestic, bath and cooking engineers, school furniture. Ref: Bradford, Price AUD $25 +P&P |
|
 |
Erie Tool Works S wrench, marked “7338B / E” Refer Rathbone Vol III, P77 Ref: Erie-7338B Price: AUD $25 +P&P |
|
 |
Erie Tool Works S wrench, marked “7338B / E” also known as Eberhard wrench. Ref: Erie-7338F Price: AUD $25 +P&P |
|
 |
TR&Co No 4 malleable cast iron spanner. Thomas Robinson & Co of Melbourne made all manner of agricultural implements and machinery. A very striking S shaped spanner, will look good cleaned up. Ref: TR-C-No4 Price: AUD $25 +P&P |
|
 |
Cast iron spanner made by Chas Holmes & Sons (of Adelaide), large embossed letters, good condition. Probably used as a water tank spanner. Ref: ChasHolmes Price: $25 +P&P |
|
 |
Ronaldson Brothers & Tippett wrench for a farm pumper. Ref: R&T-F390A Price: $35 +P&P |
|
 |
Mintern Melbourne cultivator spanner, similar to Planet Junior. Ref: MinternNo3 Price: $25 +P&P too late |
|
|
|
Combination tool – pliers, hammer, screwdriver, chopper, 5 inches long, no maker. Ref: Combo-1 Price: $35 + P&P |
|
|
|
Thomas Bradford & Co of Crescent Iron Works, Salford, Manchester and 140, 142 and 143 High Holborn, London. Since 1950. Manufacturers of Laundry, dairy, domestic, bath and cooking engineers, school furniture. Ref: Bradford, Price AUD $25 +P&P |
|
 |
Case Tractor flat pressed steel wrench. Ref; Case-flat Price: AUD $35 + P & P |
|
 |
Case Tractor heavy cast iron wrench. It has the usual bend in it, however the casting is thick and flat, first we have seen like this. Ref: Case-flat-CI Price: AUD $35 + P & P |
|
 |
Emerson-Brantingham Co malleable wrench marked “OP890 EB” Ref; EmersonOP890EB Price AUD $25 + P&P |
|
 |
Daniel Harvey Box Hill Melbourne cast iron spanner No R173.
6.5 inches long, in very good condition, and a very good and clear
casting, unlike many by this maker. Ref: Havey R173(b) Price; $20 plus postage |
|
 |
Large Cast Iron spanner marked "DANIEL HARVEY / BOX HILL MELBOURNE D59" 15.5 inches long, in good condition, but a rough casting as is often the case with this maker, 1.2Kg Ref: Harvey D59-2 Price: AUD $25 + $15 P&P in Australia |
|
| International Harvester and related Companies |
|
|
 |
International Harvester Socket wrench numbered 25462DA, no logo. Ref: IHC-25462DA Price: $25 plus postage |
|
 |
International Harvester adjustable wrench marked “IHC” in circle and “1E” on top jaw Ref: Price: $25 plus postage |
|
 |
International Harvester Spanner marked “704671-R1, IH, / EAGLE BRAND" Ref: IH-7046721-R1 Price: $20 plus postage |
|
 |
Spanner / Wrench for International Harvester / McCormick
Deering Gear Drive Tractor 15-30, from years 1923-1929. No handle.
Weight 2.1Kg without packaging. Ref: IHC-11472-D Price: $150 plus postage |
|
 |
McCormick-Deering Rear Axle Nut Wrench No 14402-D & handle No14403-D for 10-20 Gear Drive Tractor, also Models F-30, W-30. Handle is not maker marked. Total length assembled - approx 1 metre, weight about 6Kg each. The red one has the number and maker well marked, but the handle is rather pitted. The bare one has the maker well marked, number ispoorly marked, but the handle is in good condition. $250 each, take your pick. Each would cost a fortuune to send overseas. Ref: IHC-14402-D |
|
 |
International Crawler Tractors Wrench 9534DA - Front Idler Adjusting Wrench for Crawler Tractors MC Cormick Deering T-6, & TD-6. This is a heavy spanner - it will ship in the 3 - 4 kg weight range Ref: IHC-9532DA $50 + p&p |
|
 |
Gaston Brothers spanner no W18. Gaston products were sold exclusively by International Harvester Australia from the 1930’s Ref: Gaston-W18 |
|
|
|
2 International Harvester S shaped malleable wrenches, marked H523* & H523-1/2. Ref: IHC-H523 Price: $50 +P&P |
|
 |
International Harvester S wrench marked “IHC P28”. It has a hang hole drilled in it – save you doing it! Ref: IHC-P28 Price: $20 m+P&P |
|
 |
This adjustable wrench appears in listings as AP11404 in listings, but only displays "AP331 IH". This one is marked British made and is an inch longer than the Australian made version (see above). Evidently, International Harvester must have brought them some time after the change of logo, 11 in long, looks to have been made by Garrington but not marked so. Weight 830g plus packaging. Ref: IHC-AP331-long Price: $20 +P&P
|
|
 |
IHC 1326E spanner, old type Weight 280g plus packaging Price: $15 +P&P |
|
 |
IHC 1326-E spanner, modern type Ref: IHC-1326-E Weight 300g plus packaging Price: $15 +P&P |
|
 |
IHC G3172, Weight 170g plus packaging Ref: IHC-G3172 Price: $15 + p&p |
|
 |
IHC 6850H, Oil Pan Cap, Radiator Cap & Water Pump wrench Ref: IH- 6850H Price: $25 + p&p |
|
 |
IHC AP17069. Australian Production. The AP part of the number is missing, ground off during the fabrication process. Weight 1.8kg plus packaging Pricve: $30 + p&p |
|
 |
IHC 12335D. Weight 300g plus packaging Price: $15 + p&p |
|
 |
IHC Spanner Wrench marked L9, uncommon Ref: IHC-L9 Price: $50 +P&P |
|
 |
IHC Spanner Wrench marked G3256 Ref: IHC-G3256 Price: $25 +P&P
|
|
 |
IHC Spanner Wrench marked A1210, uncommon Ref: IHC-A1210 Price: $50 +P&P |
|
 |
Small International Harvester spanner wrench G3173 IHC Ref: IHC-G3173 Price: $25 +P&P |
|
 |
Small International Harvester spanner wrench G3173 IHC IH variation. Ref: IHC-G3173L-up Price: $25 +P&P |
|
 |
Small International Harvester spanner wrench 12737-DA IH Ref: IHC-12737-DA Price: $25 +P&P |
|
 |
Small International Harvester spanner wrench 12737-D Ref: IHC-12737-D Price: $25 +P&P |
|
 |
Ref: IHC-G3171 Price: $25 +P&P |
|
|
|
IHC Marked Clevis Wrench, # D236, very uncommon. Ref: IHC-D236 Price: $50 +P&P |
|
 |
Arbour Nut Wrench for disc plow, Australian Production, marked “AP593 IH. A hard to find socket wrench. It has some of original blue/black paint, good condition. Ref; IHC-AP593-b Price: $45 +P&P |
|
 |
Arbour Nut Wrench for disc plow, Australian Production, marked “AP593_ IHC. The Dielot marked is “A”. A hard to find socket wrench. Good condition. Ref: IHC-AP593DieLot-A Price: $35 +P&P |
|
 |
Arbour Nut Wrench for disc plow, Australian Production, marked “AP593_ IHC. The Dielot marked is “F”. A hard to find socket wrench. Good condition. Ref: IHC-AP593DieLot-F Price: $35 +P&P |
|
|
|
IHC Cream Separator pin wrench. Good condition, pins are OK Ref: IHC-950C Price: $25 +P&P |
|
|
|
IHC Cream Separator pin wrench. Some pitting, pins are OK Ref: IHC-924C Price: $20 +P&P |
|
|
|
Newell Sanders Plow Company A120 Wrench - Chattanooga, Tennessee (IHC related company) 13 inches long. A hard to find wrench. Ref: NS-A120 Price: $75 +P&P |
|
|
|
(Newell) Sanders Plow Company A416 Wrench - Chattanooga, Tennessee (IHC related company) 13 inches long a very hard to find wrench. Ref: NS-A416 Price: $95 +P&P |
|
|
|
IHC 10 inch shifter AP-331 / H. AP stands for Australian Production Ref: IHC-AP331 Price: $25 +P&P |
|
 |
International Harvester Wrench H911, slight stress crack in jaw – see pic Ref: IHC-H911-2 Price: $20 +P&P |
|
 |
International Harvester wrench Z812 Ref: IHC-Z812 Price: $25 + P&P |
|
 |
International Harvester Socket wrench P1189 Ref: IHC-P1189 Price: AUD $25 +P&P |
|
 |
International Harvester wrench M231 Ref: IHC-M231 Price: AUD $25 +P&P |
|
 |
International Harvester Lug Wrench IH-373942 R1 Ref: IH-373942R1 Price: AUD $25 +P&P |
|
 |
International Harvester Wrench AP11408. AP stands for Australian production Ref: IHC AP11408 Price: AUD $25 +P&P |
|
|
|
International Harvester Wrench 1326E & 1326-E Ref: IHC 1326E & IHC 1326-E Price: $25 each +P&P |
|
 |
International Harvester Wrench 1595E Ref: IHC 1595E Price: AUD $25 +P&P |
|
 |
International Harvester Lug Wrench 19495-HA Ref: IHC 19495-HA Price: $15 +P&P |
|
 |
International Harvester Wrench 21264-D Ref: IHC 21264-D Price: AUD $25 +P&P |
|
 |
International Harvester IHC N738 Socket wrench 5 inches long, 2 sq sockets. Ref: IHC-N738 Price: AUD $25 +P&P |
|
 |
International Harvester spanner wrench marked M141, IHC Arrow shows a slight stress crack Ref: IHC-M141, AUD $25 + P&P |
|
 |
International Harvester truck wheel socket number 29891H, no emblem. Ref: IHC-29891H Price: AUD $30 + P&P |
|
| John Deere Company Group | ||
  |
John Deere chain break tool, used to fix apron chains see #361 in the JD list Ref: JD-J1480H Price: $50 plus postage |
|
  |
Top green one 19” long double ended ring spanner wrench. Fabricated, found in Parts Lists for many Tractors, Tractor Wheel Wrench Socket see #494 in the JD list Ref: JD-R34827 Price: $40 plus postage Bottom 19” long double ended ring spanner wrench. Fabricated, found in Parts Lists for many Tractors, Tractor Wheel Wrench Socket, see #495 in the JD list Ref: JD-R34827R Price: $40 plus postage |
|
 |
Gale flat spanner number DG847 [two available] Ref: Gale-DG847 Price: $15 +P&P |
|
 |
Oliver wrench marked F239, 1. This wrench comes with several
different numbers following the F239, which I assume denotes a die lot. Ref: OliverF239-2 Price: $25 plus postage |
|
 |
Petters of Yeovil - famous for their stationary engines Ref: PettersYeovil Price: $25+P&P |
|
 |
Richmond & Chandler, of Victoria Works, Salford, and then Globe Works, Southall Street, Salford, Manchester. Agricultural and Bakers' Engineers. Est 1834 Ref: RichmondChandler R Only marked "R" Prices as marked in pics +P&P |
|
 |
Rock Island Plow Company, Rock Island, Illinois Ref: RockIsland-Flat Price: $25 +P&P |
|
 |
Shearer Cast Iron Spanner marked "199A" Ref: Shearer199A Price: $25 +P&P |
|
 |
Shearer Cast Iron Spanner marked "3186" Ref: Shearer3186 Price: $25 +P&P |
|
 |
Knock Off wrench marked "Hammer Tight / 8830" this is a wrench for tightening and loosening flywheels on Viliers engines. It looks like 7/16WW across the flats. Ref: Villiers-Hammer Price: $30 +P&P |
|
| MH Compnies | ||
 |
Verity/ MH malleable spanner numbered P4973 Ref: P4973 Price: $50 plus postage |
|
 |
<MH> Vandergrift 8inch adjustable wrench. Ref: <M-H>-Vandergrift Price: $45 plus postage |
|
|
|
||
| Shearing stuff | ||
 |
Un-named Shearing Handpiece Tool, similar to the one above, but no maker. Ref: Cooper-2 Price: $20 +P&P |
|
 |
Cooper Grinder Spanner (two available) Ref: Cooper-2 Price: $25 each +P&P |
|
 |
Shearing Handpiece Cog Spanner-tool marked 917, Cooper made these. Ref: CogSpanner-3-917 Price: $25 +P&P |
|
 |
Shearing Handpiece Cog Spanner-tool. Ref: CogSpanner-2 Price: $20 +P&P |
|
 |
Lister Engine spanner marked “LISTER” Ref: Lister-DOE Price: AUD $25 +P&P |
|
 |
Lister Engine spanner marked “LISTER” Ref: Lister-DOE-2 Price: AUD $25 +P&P |
|
 |
Lister shearing handpiece adjusting spanner marked “LISTER” Ref: Lister-Handpiece-2 Price: AUD $25 +P&P |
|
 |
Lister shearing handpiece adjusting spanner unmarked Ref: Lister-Handpiece-3 Price: AUD $20 +P&P |
|
 |
Lister of Dursley cast spanner, well marked “R A LISTER” Price: AUD $25 +P&P |
|
 |
Shearing Handpiece Tool, mo maker marked, chrome work good, pin ends have been modified a little. Ref: HandpieceTool Price: AUD $25 +P&P |
|
 |
Experts hook spanner for shearing handpiece disassembly, no maker visible Ref: Shearing-Experting-1 Price: $25 +P&P |
|
 |
WOLSELEY Vintage Engine, shearing or motoring spanner wrench ½ x 7/16 WW. Ref: Wolseley -2 Price: AUD $25 +P&P |
|
|
|
Wolseley Shearing Grinder Spanner. Marked "STEEL FORGING 1" (1 inch whitworth) Ref: Wolseley -1 Price: AUD $25 +P&P |
|
 |
Moffat Virtue Shearing handpiece screwdriver. Ref: MVScrewdriver-1 Price: $25 +P&P |
|
 |
Modern type Lister Handpiece Screwdriver with hrd lastic body. Ref: Lister-1 Price: $20 +P&P
|
|
|
|
||
| |
|
