|
Item Picture
|
Item Description
|
| Spanners
& Wrenches |
|
| Barcalo Buffalo - supplied with Jeep onboard tool kit |
|
Fairmount Chrome Alloy - round head series - supplied with Jeep onboard tool kit
|
 |
Fairmont wrench with jaws 25/32 x 5/8 right for Jeep 28-S , but not stamped so.
Ref: Price; $20 plus postage |
| VLCHEK - supplied with GMTK - Jeep Mechanics Tool Kit |
|
 |
Vintage WWII WC CCKW
Willys MB Ford GP GPW Jeep. Vlchek 33C Tool Wrench in Chrome-molybdenum
series. This wrench was supplied with GMTK - Jeep Mechanics Tool Kit,
(not the vehicle)
Ref: VLCHEK-33C
Price: AUD $30 +P&P
|
| VLCHEK - supplied with Jeep onboard tool kit |
|
|
Vintage WWII WC CCKW Willys MB
Ford GP GPW Jeep - Vlchek # 731A Wrench in Vlchek-CrMoly-Alloy Steel
series, jaws marked 731A 7/8 x 3/4. This wrench was
supplied with Jeep onboard toolkit
Ref: Vlchek-731A Vlchek-CrMoly
Price: $30 plus postage
|
|
Two Vintage WWII WC CCKW
Willys MB Ford GP GPW Jeep. Vlchek Tool Wrench in
Chrome-molybdenum
series. These are numbers (27C-11/16 x 9/16 and 28S -25/32 x
5/8) out of a set of five for onboard set of tools. Note these are
pitted but might do as a placeholder until better ones come along
Ref: VlchekWrenches-27C-28S
Price: $30 for the pair, plus postage |
| Indestro /
Duro |
|
 |
Left - Duro-chrome ½ drive male / female universal drive number 588D, suit GMTK socket set.
Centre & Right - Indestro 3217 1/2-Drive Universal, stamped with
the model number on the male end ca. Mid 1930s. suit GMTK socket set.
Price: $25 each + postage |
|
|
Indestro 1027C ( 27C) DOE suitable for WWII WC CCKW
Willys MB Ford GP GPW Jeep. Sizes 9/16 x 11/16 (AF)
Ref: Indestro-1027C
Price: AUD $30 +P&P
|
|
|
Duro Chrome No 1027C DOE suitable for WWII WC CCKW
Willys MB Ford GP GPW Jeep. Sizes 9/16 x 11/16 (AF)
Ref: DuroChrome-1027C
Price: AUD $30 +P&P
 
|
|
|
Indestro No 27C DOE suitable for WWII WC CCKW Willys MB
Ford GP GPW Jeep. Sizes 9/16 x 11/16 (AF)
Ref: Indestro-27C
Price AUD $30 +P&P
|
| Herbrand |
|
 |
Herbrand 1025 (25) This number is Herbrands
variation
on the ISN 25 - suits: WWII WC CCKW Willys MB Ford GP GPW Jeep. Jaws
are marked 19/32 1025 Herbrand made in USA x
½
Ref: Herbrand 1025
Price AUD $30 +P&P
|
|
Herbrand 731-A. This number conforms to the tool set for WWII WC CCKW Willys MB Ford GP GPW Jeep. Jaws sizes
are marked in SAE sizes, but measure 3/4 x 7/8 AF. It has some owner notches along shaft.
Ref: Herbrand 731-A
Price AUD $20 +P&P
|
 |
Herbrand 25 This number conforms to the tool set for WWII WC CCKW Willys MB Ford GP GPW Jeep. Jaws sizes
are not marked but measure 19/32 x
½
Ref: Herbrand 25
Price AUD $30 +P&P
|
 |
List of G503
Jeep spanners as supplied at the time |
|
McKaig-Hatch with ISN nmber 731A, jaws are 3/4 x 7/8",
length 7-3/4" but not marked. This is the right ISN and jaw sizes, but
appears shorter that the specified examples for Jeep. We do not know if
McKaig-Hatch was a regular supplier for Jeep. it has owner initials on
it. Inset shows MH initial on the back.
Ref: MH-731A
Price $20 plus postage
|
 |
Herbrand No 1940 Obstruction Spanner 5/8 x 4/4 AF.
Marked
Herbrand Van-chrome / Made in 1940 USA Commonly referred to as half
moon spanner used to access awkward places.
Ref: Herbrand-1940-Moon-5
Price: $25 +P&P |
 |
Barcalo-Buffalo USA Obstruction Spanner 5/8 x 9/16 AF.
Commonly referred to as half moon spanner used to access
awkward places like starter motor mounting nuts for example. The
smaller end has been reduced in thickness to fit a tight job.
ref: BarcaloHalfMoon-4
Price: $25 +P&P |
 |
Herbrand-H2 Tappett adjusting spanner wrench, 8 inches
long. Shallow grind on back possibly owner mark. Picture
shows
both sides of same item.
Ref: Herbrand-261-262
Price: $25 each +P&P |
| Pliers |
|
| Drop Forged |
|
|
|
Pliers marked Diamond Caulk DC K36 Dulith
USA may be right for WWII Jeep G503 etc
Ref: DC-K36
Price AUD $25 +P&P
|
|
|
Drop Forged. USA. Right for WWII Jeep G503 etc
Ref: Drop Forged
Price AUD $25 +P&P
|
| Tire / Tyre
Pressure Gauges |
|
out of stock
|
|
| |
|
