|
Item Picture
|
Item Description
|
|
|
 |
Lucas ignition / points screwdriver with feeler gauge which reads LUCAS .014 .016. Suitable for many British cars.
Reference Lucas-1
Price: $30 plus postage
|
| Unusual Screwdrivers |
|
 |
Cast iron screwdriver B & S Co Hartford Conn USA (Billings $ Spencer). Supposedly used on early model fords.
Ref: B&S-screwdriver
Price: $35 plus postage |
 |
Folding Screwdriver, folds flat partially inside the folded
handle. Two flat screwdriver blades swing down individually and
lock into the T position for use. Fold away for stowage in a tool roll.
Ref: Folding Screwdriver
Price: $25 plus postage
|
| London Pattern Screwdrivers |
|
 |
London pattern screwdriver / turnscrew, marked 'W
Baker London / Prize Medal 1876 Philadelphia" 7.5 inches overall
length. Handle is boxwood. Blade end has been ruined and needs
fettling.
Ref: Baker
Price: $30 +P&P
|
 |
London pattern screwdriver / turnscrew, marked 'Clay Limited / 9105853" 7 inches long, Beech handle
Ref: Clay-7inch
Price: $25 +P&P
|
 |
London pattern screwdriver / turnscrew, marked 'E HENRY & Co, SHEFFIELD" 10.75 inches long. Beech handle
Ref: Henry
Price: $25 +P&P
|
 |
10” London Patter Screwdriver marked “D. MOSELEY SHEFFIELD”
Ref: MOSELEY
Price: $25 +P&P
|
 |
London Pattern Screwdriver-1-unmarked
Ref: Screwdriver-1-unmarked
Price: $15 + postage |
|
8-5/16" inch London Pattern screwdriver marked “ Henry
GRE… Hermitage Sheffield” also marked Robert Marples on the
ferrule
ref: Screwdriver-2-Gre
Price: $25 + Postage |
 |
London Pattern 7inch Stanley type wooden handled screwdriver, poor condition
ref: Screwdriver-5-unmarked
Price: $15 + Postage |
 |
Cabinet Makers 6inch screwdriver Marples brand , blade length = 2inches
ref: Screwdriver-6-Marples
Price: AUD $35 plus postage |
 \
 |
6inch screwdriver marked “Robt Sorby Sheffield England.
6 inches total length, blade length 2-3/8”. Some iron staining on
one side of the bulb.
Ref: Sorby-6in
Price: AUD $35 plus postage |
|
|
|
|
|
|
| Cabinetmaker Pattern Screwdrivers |
|
 |
10.5 inch Cabinet makers pattern screwdriver, boxwood handle. Handle has a split, see pic
Ref: Marples-2
Price: $25 +P&P
|
 |
Tiny screwdriver marked “Millers Falls Co Millers falls
Mass U.S.A.”. total length is 3inches, blade length is
1-1/2”
Ref: MillersFalls-3in
Price: AUD $35 plus postage |
 |
7inch Cabinetmaker Pattern screwdriver marked “Made in Sheffield”
Ref: No-2
Price: $25 + postage |
 |
7inch Cabinetmaker Pattern screwdriver marked “H S & Co”
Ref: no-3
Price: $25 + postage |
 |
8-1/8 inch Cabinetmaker Pattern screwdriver marked “Sorby & Son Sheffield” with kangaroo pictorial.
Ref: no-4
Price: $25 + postage |
 |
8-1/8 inch Cabinetmaker Pattern screwdriver marked “ J M Ellis & Sons Ltd”
Ref: no-5
Price: $25 + postage |
 |
8.5 inch Cabinetmaker Pattern screwdriver marked “ Hale Bros Sheffield”
Ref: No-6
Price: $25 + postage |
 |
9.5 inch Cabinetmaker Pattern screwdriver No maker marked
Ref: no-8
Price: $25 + postage |
 |
10-3/8” Cabinetmaker Pattern Screwdriver marked
“ W Marples Sheffield Eng / Cross Ground
Point”SKIDPROOF”
Ref: No-9
Price: $25 + postage |
 |
10-3/4” Cabinetmaker Pattern Screwdriver marked “Sorby & Sons Sheffield
ref: No-10
Price: $25 + postage |
 |
13” Cabinetmaker Pattern Screwdriver marked “Mathieson Glasgow”
Ref: No-11
Price: $25 + postage |
 |
14.25” Cabinetmaker Pattern Screwdriver marked “ALFRID Sheffield
Ref: No-12
Price: $25 + postage |
 |
13-3/4” Cabinetmaker Pattern Screwdriver marked “ Robt Sorby & Sons Sheffield
Ref: No-13
Price: $25 + postage |
|
10” Cabinetmakers Pattern Screwdriver marked “SIGNAL SHEFFIELD”
Ref: No-14- SIGNAL
Price: $25 +P&P
|
 |
Cabinetmaker style screwdriver, total length 10 inches long, straight shaft, often used in motoring tool kits
Ref: 15-a
Price: $25 plus postage
Cabinetmaker style screwdriver, total length 9 inches long, straight
shaft, often used in motoring tool kits. It has “Made in
England” stamped on the shaft
Ref: 15-b
Price: $25 plus postage |
| Perfect Handle Screwdrivers |
|
 |
Perfect handled screwdriver 7-3/4 inch long
Ref: Perfect-1
Price: $25 plus postage |
 |
11.5inch Perfect handled screwdriver, no maker, hex bolster.
Ref: Screwdriver-3-Perfect
Price: $30 Plus postage |
|
Shelley nominal 10 inch perfect handled screwdriver (actual 9-5/8"). One of the scales has been replaced.
Ref ShelleyScrewdriver10inch-1
Price: $35 +P&P
|
 |
Shelley nominal 10 inch perfect handled screwdriver (actual 9-5/8"). Both of the scales may have been replaced.
Ref ShelleyScrewdriver10inch-2
Price: $35 +P&P
|
|
|
Tobrin 9.5 inch perfect Handled Screwdriver, blade is 5In
long, wooden scale on one side is marked “TOBRIN” No marks
on the blade itself. It is in v good condition.
Ref: Tobrin-9.5
Price: $35 + postage
 |
|
|
|
|
| TURNER BRAND |
|
|
|
 |
Turner Screwdriver Set No T154. Comes in a vinyl wallet with
Acetate handle and 5 interchangable driver bits. Some splits in vinyl
at top where folded into a roll. Acetate handle is in v good condition
Hard to find a complete set.
Ref: TurnerT154-Kit-2
Price: $25 plus postage |
 |
Turner Australia 8 inch flat blade screwdriver with tang
through wooden handle. Blade is 8in long, handle is 6in long, total
length 14 inches, unused.
Ref: Turner8inchScrewdriver-2
Price: $35 +Postage |
 |
Turner-105-Screwdriver 6inch flat blade, total 11 inches long, through tang, ltooks like a Ford tool, quire good condition
Ref: Turner-105-6inch
Price: $35 + postage |
|
|
|
|
|
|
| Car kits & Sundry Screwdrivers |
|
|
|
|
Small screwdriver suitable for VW round toolbox or other purpose. Made by Granit, see box below. Blade length is 3"
Reg: GranitScrewdriver-3in
Price: $25 + postage
|
|
4 inch screwdriver suitable for VW round toolbox or other purpose. Made by Granit, German, new condition
Ref: GranitScrewdriver-4in
Price: $25 + postage |
 |
2-1/2” blade, overall 5-3/8, black wooden handle. Look right for WLA Harley toolkits.
Ref: Screwdriver-Black-1
Price: $25 plus postage |
 |
2-3/8” blade, overal 7-7/8, black wooden handle,
faintly marked what looks like: “NKP MFCo, Philadelphia
USA” Look right for WLA Harley toolkits.
Ref: Screwdriver-Black-1
Price: $25 plus postage |
|
|
| Loop Handled Screwdrivers |
|
|
4.5 inch loop handled screwdriver – no maker, looks like a hobby / kit screwdriver.
Ref: Hobby Screwdriver
Price: $20 + postage |
|
8.5 inch wire loop handled screwdreiver marked “Made in England”
Ref: Screwdriver-8-Loop-2
Price: $25 plus postage |
 |
9inch wireformed loop handled screwdriver, flat blade, no maker
Ref: LoopHandle-9inch
Price: $20 + postage |
|
6inch wireformed loop handled screwdriver, Phillips blade,
marked “ Made in England Phillips British Pat no 663163
ENFO”
Ref: LoopHandle-6inch-ENFO
Price: $30 + postage |
| |
|
